Ways of processing Mp3, Mp4, FLAC, Ogg, APE, AAC and Wav files can be divided into 2 sorts: distorting and not distorting. And if distorting ways of processing change an original relation and level of amplitudes and frequencies of a sound whereas not distorting ways of processing change level of all amplitudes equally or leave invariable level of all amplitudes and frequencies of a sound.
The most widespread distorting way of processing is an equalizer, and the most widespread not distorting way of processing is а normalizer. We will consider a normalizer in given article.
Gist of a normalization consists that an amplitude of initial beep varies, and a form remains former.
And it will feel on hearing as change of force a sound or volume.
Change of volume is accompanied by change of dynamic range that is relations of the loudest value to the most silent value of beep.
Increase of a volume leads to increase a dynamic range.
Contraction and reduction of a dynamic range is accompanied by music which sounds exactly, monotonously, all time with approximately identical loudness, it becomes boring, inexpressive, more flat, an expression and dynamism disappears, brightness of perception is lost.
Certainly, it is possible to take advantage of a volume control or a button of volume and easily to increase volume level, not resorting to a help of a normalizer but if you have many compositions it gives a tangible inconvenience. Each composition has it's a dynamic range and a volume average level.
If all musical compositions are executed in one style or a genre that, as a rule, it is possible will be limited to peak normalization. Peak normalization for group of compositions fixes for each composition a dynamic range at one level thus that all compositions have a same dynamic range.
If all musical compositions are executed in different style or a genre that, as a rule, resort to normalization on an average level. Normalization on an average level for group of compositions fixes a dynamic range at different level for each composition depending on average value of volume of this composition that creates sensation of identical volume at transition from one composition to another for all group of compositions.
Let's consider normalization of a sound with reference to program Sound Normalizer.
Sound Normalizer differs from other sound editors of type "Sound Forge", which, fulfilling normalization of files Mp3, at first convert this Mp3 file in Wav file, then normalize this Wav file, and then already back convert this file Wav in Mp3 file. Sound Normalizer fulfills normalization of files Mp3 without conversions or any transformation and thus simply changes a control footing in each frame of Mp3 file.
Sound Normalizer differs from other players of type "foobar 2000", which, fulfilling normalization of files Mp3 use for this purpose APEv2 tags leaving thus each frame of file Mp3 not touched. Sound Normalizer does not use APEv2 tags for normalization that does possible listening Mp3 files with the changed volume in hardware players with flash memory. Besides, Sound Normalizer fulfills testing and normalization on each channel separately that allows to align automatically at normalization volume level in each channel on identical level that improve a stereo effect.
You need to open a file prior to a beginning of normalization.
The program has 2 modes: single and batch.
Single Mode
Batch Mode
You can open a file in a single mode having executed a command "Open".
You can go in the batch mode having executed a command "Batch Processor".
You can open files in the Batch Processor using three ways:
Add
If You execute a command “Add Files” that can select Mp3, Mp4, FLAC, Ogg, APE, AAC and Wav a file or files;
If You execute a command “Add Folder” that can select all Mp3, Mp4, FLAC, Ogg, APE, AAC and Wav the files which are in this folder;
If You execute a command “Add Folders” that can select all Mp3, Mp4, FLAC, Ogg, APE, AAC and Wav the files which are in this folder and all subfolder being in this folder.
The program has for Mp3 files normalization on an average level with definition of clipping. As level of a sound for Mp3 files is near to peak level or exceeds that one peak normalization for Mp3 files it appears not expedient.
Combination of a normalization on an average level with a peak normalization preventing a clipping will be an optimal variant.
Clipping is a distortion of beep expressing in appearance of "hissing" and "crackle".
The clipping appears in Mp3 file when Wav file is converting with peak level above 90 %. Perform peak normalization therefore before converting Wav files in Mp3 for Wav files with peak level no more than 90%.
Please, look and listen the same beep without clipping and with clipping.
No Clipping (the file NoClipping.mp3)
Listen and compare the non-clipped audio "NoClipping.mp3" with the clipped audio "Clipping.mp3"
No Clipping
Clipping
Sound Normalizer
Sound Normalizer
Clipping (the file Clipping.mp3)
Listen and compare the clipped audio "Clipping.mp3" with the non-clipped audio "NoClipping.mp3"
Clipping
No Clipping
Sound Normalizer
Sound Normalizer
Test for Mp3, Mp4, FLAC, Ogg, APE, AAC and Wav files and define a recommended maximum level of normalization without clipping before normalization will be the best order of performance normalization.
Test
The recommended maximum level of normalization without clipping is an optimum level of normalization eliminating clipping and providing maximum quality of a sound.
In the batch mode the recommended maximum level of batch normalization of the list of processing without clipping is the optimum level of normalization eliminating clipping and providing maximum quality of a sound, calculated for a current list of processing.
Batch Test
In batch mode, there is a command "Normalize each file on a maximum level without clipping". This is an implementation of peak normalization on a maximum level, i.e. in each file volume increased just enough as the speaker does not "rattle" and the volume will be maximum possible. In this case the normalization tends to 0 decibels (dB).
The "Save the ratio between the channels" is disabled by default and Sound Normalizer automatically adjust according to the average peak level or the volume of each channel. If the command "Save the ratio between the channels" is enabled then the Sound Normalizer will keep same original ratio of a volume level between channels, increasing the volume in each channel to the same value up to the level of a given synchronized sliders regulator normalization. That is, the command "Save the ratio between the channels" allows you to change the volume of the two stereo channels (left, right) to the same value, and thus retains its original volume differences between channels. In this two-channel stereo signal is selected having the maximum amplitude or loudness. Based on this information and the normalization is performed simultaneously in the two channels.
Batch Normalizing
Level of normalization for Mp3 files expresses in percentage concerning value in 89 db in the program Sound Normalizer. That is, 89 db - it is 100%.
89 db is defined by practical consideration for majority Mp3 files volume level, on which else there are no clipping.
Reduce Mp3, Wav and FLAC file size
If you need to reduce quality and a size mp3 file then you should use a converter from mp3 in mp3.
Sound Normalizer includes converter from mp3 in mp3 with saving initiating ID3 v1 and v2 tags ( Actor/Title/Genre, etc.).
It is necessary to note that increase of a stream speed or bit rate of a mp3 file does not increase quality of sounding this file.
You will see a column "Estimated size", passing in a batch mode as it is visible in a picture more low, value in this column will be updated each time when you in the encoder settings (the button "Settings...", the Output format "MP3" on the tab "Batch Converting") press button "Apply" or "OK".
Estimated size
For reduce size mp3 file is better to reduce stream speed or bit rate. In this case you have 3 variants of a compression mode of the stream data:
1. With constant stream speed (Constant bit rate, CBR);
2. With variable stream speed (Variable bit rate, VBR);
3. With average stream speed (Average bit rate, ABR).
CBR mode will give you the predicted size of the Mp3 file.
VBR mode will give you an unpredictable value for the mp3 file reduction.
ABR mode will give you predicted with much bigger (in comparison with VBR) accuracy a value of reduction mp3 file.
If you need to save quality and to reduce a size of Wav file then you are better to use the converter from Wav in FLAC. By default, encoder FLAC parameters are adjusted on obtaining of an optimal ratio speed/level of compression for a majority of types input files. However, this majority of types input files is that the majority of parameters encoder FLAC are calculated for a sound from CD-audio (i.e. 44.1 kHz, 2 channels, 16 bits). Thanks to of simple algorithms of decoder a speed of decoding FLAC above speed of coding besides encoder FLAC has hardware support that does the codec even faster and power efficient as it not strongly loads the central processor. After you converted a sound in a file of format FLAC you by means of program Sound Normalizer can reduce file size .flac still at least by 10 %. For this purpose you need to open a file .flac and to reduce level of normalization of this file proceeding from that that reduction of level of normalization by 1 % reduces file size .flac at least by 0.2 %.
Resume
The normalization is not distorting sort of processing.
The normalization is accompanied by change of a volume or of a dynamic range, that is the relation of the loudest value to the most silent value of beep.
The normalization allows to improve quality: if it for Mp4, FLAC, Ogg, APE, AAC, Wav files expresses by increase of a dynamic range for Mp3 files it expresses by elimination of a clipping.
Starting normalization Mp3, Mp4, FLAC, Ogg, APE, AAC and Wav files it is necessary to mean, that there are 2 sorts of normalization:
Peak normalization;
Normalization on an average level.
It is necessary to know that there are 2 modes of normalization:
The single;
The batch.
The normalization of the batch mode works with a list of processing and allows to align perceived volume for group of compositions. If all songs belong to the same genre or style of music in group of compositions then usually enough and peak normalization.
If there are songs in group of compositions having different genres then it is usually necessary to use normalization on an average level.
Usage of normalization on an average level is necessary for Mp3 files as their level of volume, as a rule, is equal maximum or exceeds it, that calls appearance clipping. Mp3 files have a small size and consequently are allocated on a disk of usual capacity in a considerable quantity and belong not seldom to different genres of music. Usage of normalization on an average level together with peak normalization preventing clipping of beep and allowing to receive maximum quality and therefore will be optimal for Mp3 files.
Mobile Version
